Saturday, November 16, 2019
Structure and Function of Biomolecules
Structure and Function of Biomolecules All Biomolecules have certain functions and these molecules all have a unique structure which is why they function in these ways. These molecules are known collectively as macromolecules, these molecules are grouped into four main categories which each have theirà own structure. These structures are the key to the macromolecules functions as each of them do a specific task in the body. Macromolecules are grouped into carbohydrates, nucleic acids, proteins, and lipids. In most cases macromolecules are polymers, which is a long molecule which are made by linking together a large number of small, similar compounds called monomers. Polymers are formed by a dehydration reaction, this happens by the -OH group being removed from one monomer, and a hydrogen atom (H) is removed from the other monomer, then the polymer is formed (as shown in Figure 1). This reaction is also used in the linking of fatty acids to glycerol in lipids. This reaction is referred to as a condensation or dehydration reaction, because the reaction produces a water molecule from the -OH and -H groups removed, and for each monomer that is added a water molecule is given off. The opposite reaction is the hydrolysis reaction which breaks down polymer to there respective monomers. Water is added to the macromolecule splitting the bonds between the monomers and the -OH and -H are attached to form the monomers (as in Figure 2). Carbohydrates Carbohydrates are a group of molecules made of carbon, hydrogen, and oxygen in a molar ratio 1:2:1. Carbohydrates have a general formula of (CH2O)n, where n is the number of carbon atoms. These carbohydrates contain a lot of carbon-hydrogen bonds, which releases energy when oxidation occurs, as carbohydrates are well suited for energy storage. Sugars are some of the most important energy sources and they exist in several different forms, such as monosaccharides, disaccharides and polysaccharides. Monosaccharides are the simplest of carbohydrates, they may contain as few as three carbons but the ones that have a key role in energy storage have six carbons. Disaccharides serve as transport molecules in plants and provide nutrition in animals; they are used by plants for transporting glucose around the plant as disaccharides are not easily metabolised, but disaccharides are usually consumed by humans and animals. Polysaccharides provide energy storage, such as starch consists entirely o f ÃŽà ±-glucose molecules linked in a long chain. Cellulose is a structural polysaccharide which also consists of glucose linked in long chains, but these molecules are ÃŽà ²-glucose. Carbohydrates are used as a source of energy for processes in the body such as muscle movement (Raven et al 2008). Proteins Proteins are linear polymers made up of a combination of 20 different amino acids, which contain amino group (-NH2) as well as an acidic carboxyl group (-COOH). The specific order of amino acids determines the proteins structure and function. The amino and acid carboxyl group go through a dehydration reaction to form a peptide bond which joins the amino acids together to form proteins. Proteins have many different functions which are placed into seven categories; Enzyme catalysis, Support, Defence, Motion, Transport, Regulation and Storage. Enzyme catalysis is when enzymes which are globular proteins with a three-dimensional shape that fit around some molecules to facilitate chemical reactions (Raven et al 2008). Support proteins fibres play a structural role, these fibres include keratin in hair fibrin in blood clots and collagen which forms the matrix of skin, ligaments, tendons, and bones, and is the most abundant protein in a vertebrate body (Raven et al 2008). Defence proteins a re globular and use there shape to recognise foreign microbes and cancer cells, these cell-surface receptors are from the core of the bodys endocrine and immune system (Raven et al 2008). Muscles contract through the sliding motion of two kinds of protein filaments: actin and myosin (Raven et al 2008). A variety of globular proteins transport small molecules and ions. The transport protein Haemoglobin, for example, transports oxygen in the blood stream (Raven et al 2008). Small proteins called hormones serve as intercellular messengers in animals. Proteins also play many regulatory roles within the cell-turning on and shutting off genes during development (Raven et al 2008). Calcium and iron are stored by binding as ions to storage proteins (Raven et al 2008). Lipids Lipids are varied in structure and function, most of them are non soluble in water. Lipids have a very high proportion of nonpolar carbon-hydrogen bonds; so long chain lipids cannot fold up like a protein to sequester their nonpolar portions away from the surrounding aqueous environment. Lipids are hydrophobic so when they are exposed to water there hydrophilic (polar) sections of the lipids cluster together while the hydrophobic (nonpolar) sections gather together with the inside the polar sections to stay away from the water. Fats and oils are a type of lipid which are formed from glycerol and three fatty acids. Fatty acids are long chain hydrocarbons with a carboxylic acid (COOH) at one end. Fats and oils, also known as triglycerides, can be saturated where the fatty acids contain at least one carbon to carbon double bond or they can be unsaturated which means there are no double bonds. Phospholipids are also lipids and they are composed of a polar head, a phosphate group, glycero l, and two fatty acids. Phospholipids form the cell membranes and they use the previously mentioned method for holding together cells. The hydrophobic heads gather towards the water inside and outside the cell forming the membrane, which certain molecules can go through to get inside or outside the cell. Nucleic Acids Nucleic acids are polymers of nucleotides and each nucleotide is made up of a sugar, a base and a phosphate group. Nucleic acids are the information carrying devices of each cell containing the code for all proteins. There are two main forms of nucleic acid which are deoxyribonucleic acid (DNA) and ribonucleic acid (RNA). Unique among macromolecules, nucleic acids are able to serve as a template to produce a perfect replicate of it. DNA is usually found in the nucleus of cells, which contains the genetic information necessary to build specific organisms (Raven et al 2008). Cells use RNA to read the DNAs encoded information and to direct the creation of the proteins. RNA and DNA are similar in structure and consist of duplicate copies of parts of DNA. The duplicates serve as a blueprint specifying the amino acid sequences of the proteins. In addition to serving as subunits of DNA and RNA, nucleotide bases play other critical roles in the life of a cell. For example adenine is a key co mponent of the molecule adenosine triphosphate (ATP), the energy currency of a cell (Raven et al 2008). Two other important nucleotide-containing molecules are nicotinamide adenine dinucleotide (NAD+) and flavin adenine dinucleotide (FAD). These molecules function as electron carriers in a variety of cellular processes (Raven et al 2008). So Biomolecules have certain functions which they carry out in the body because of there unique structures. These structures are unique as they contain certain bonds between molecules which are all formed in similar reactions. But the four groups of macromolecules are formed in similar reactions, dehydration and hydrolysis reactions, but they all act in different ways.
Wednesday, November 13, 2019
Fredrick Douglass Essay -- essays research papers fc
The purpose behind Fredrick Douglassââ¬â¢s Narrative was to appeal to the other abolitionists who he wanted to convince that slave owners were wrong for their treatment of other human beings. His goal was to appeal to the middle-class people of that time and persuade them to get on board with the abolitionist movement. Douglass had a great writing style that was descriptive as well as convincing. He stayed away from the horrific details of the time, which helped him grasp the attention of the women who in turn would convince their husbands to help by donating money and eventually ending slavery. He used his words effectively in convincing the readers that the slave owners were inhuman and showed how they had no feelings for other human beings. Although Douglass appealed to the middle-class people, he upset other Northerners at the same time, mainly the slave traders, because he was destroying their business. Through personal anecdotes, Douglass draws an accurate picture of slave l ife. Simultaneously, he chooses these events for how they will affect the Northern audienceââ¬â¢s opinion of southern slaveholders (Quarles ii). Douglass uses family relationships, starting with his own birth, to gain the compassion of his target audience. He never knew the identity of his father, but it was ââ¬Å"whisperedâ⬠(Douglass 2) that it was his master. Douglass mentions this to demonstrate how the ââ¬Å"master in [many] cases, sustains to his slaves the double relation of master and fatherâ⬠(2). This was so...
Monday, November 11, 2019
Disk operating system Essay
MS-DOS (Microsoft Disk Operating System) is a single-user, single-tasking computer operating system that uses a command line interface (CLI). â⬠¢ It also works as an interpreter between user and computer. â⬠¢ The term DOS can refer to any operating system, but it is most often used as shorthand for MS-DOS (Microsoft disk operating system). Originally developed by Microsoft for IBM, MS-DOS was the standard operating system for IBM-compatible personal computers. The initial versions of DOS were very simple and resembled another operating system called CP/M. Subsequent versions have became increasingly sophisticated as they incorporated features of minicomputer operating systems. However, DOS is still a 16-bit operating system and does not support multiple users or multitasking. For some time, it has been widely acknowledged that DOS is insufficient for modern computer applications. Microsoft Windows helped alleviate some problems, but still, it sat on top of DOS and relied on DOS for many services. Even Windows 95 sat on top of DOS. Newer operating systems, such as Windows NT and OS/2 Warp, do not rely on DOS to the same extent, although they can execute DOS-based programs. It is expected that as these operating systems gain market share, DOS will eventually disappear. In the meantime, Caldera, Inc. markets a version of DOS called DR-OpenDOS that extends MSDOS in significant ways. â⬠¢ â⬠¢ Components of MS-DOS â⬠¢ MS-DOS consists of four essentials programs and a set of additional utilities. Four main programs are â⬠¢ Boot Record â⬠¢ IO.SYS â⬠¢ MSDOS.SYST â⬠¢ COMMAND.COM What is BOOTing ? â⬠¢ â⬠¢ â⬠¢ It is a process that starts up a computer. It checks for proper functioning of all the peripheral devices attached with the system. It searches for the operating system and, when located, loads it into the main memory. OR When the computer is switched on, the firmware program in Read Only Memory(ROM) also called Basic Input-Output System(BIOS) reads programs and data i.e. Operating System and loads it into memory (RAM). This process is known Bootstrapping(Booting). The OS once loaded takes control of the computer, handles user interaction and executes application programs. BOOTing Sequence During Booting process, computer loads the operating system into its memory. DOS booting involves reading following files into memory namely IO.SYS, MSDOS.SYS, and COMMAND COM. The Basic Input/Output Program (IO.SYS): This program provides interface between the hardware devices and software of the system. It takes care of the keyboard input, character output to monitor, output to printer and time of the day. The File and Disk Manager Programà (MSDOS.SYS) : It contains the file management and the disk buffering management capabilities. It keeps track of all the disk access of an application program and remains permanently in memory. The Command Processor (COMMAND.COM) : It is also called command interpreter. It is the program that displays the system prompt and handles user interface by executing the command typed in by the user using keyboard. The CONFIG.SYS file : This file contains reference to device drivers which are loaded when OS takes control of the computer. This device drivers are required for configuring operating system for running special devices. The AUTOEXEC.BAT file : This is a special batch program that is automatically executed when the system is started. It can be used to define keys, define the path that MS-DOS uses to find files, display messages on the screen etc. It will be executed only if it exists in the root directory or the diskette from which the system is loaded. Each time the system is started, MS-DOS executes the commands stored in AUTOEXEC.BAT file. One can run it without restarting the system by typing AUTOEXEC at the command prompt. Warm and COLD Reboot Switching on of the computer from Power off and loading the operating system is called ââ¬Å"Cold Bootâ⬠. This generally starts with memory test and chips initialization. There may be case when the computer is already on or has hanged up and we want to reboot the system. This is known as ââ¬Å"Warm Bootâ⬠and is done by pressing ctrl+alt+del keys simultaneously or just by pressing ââ¬Å"Resetâ⬠button on the system. Naming DOS directories and files â⬠¢ â⬠¢ â⬠¢ â⬠¢ There are two name in DOS and is divided into 2 parts. 1. Primary Name 2. Secondary Name or extension. Primary name is separated from the Secondary name/ extension with the help of a dot (.) look at the following example. Example: ENVOICE. TXT â⬠¢ â⬠¢ â⬠¢ â⬠¢ Primary name can be from 1 to 8 characters long. Secondary name contains 3 or less than 3 characters and is optional. The extension tells DOS about what kind of file it is. A valid Character for naming a file are: from A to Z and the digit 0 to 9 Types of DOS commands â⬠¢ C :> Is known as DOS command prompt, where we give the commands. DOS command divided into 2 parts. 1. Internal Commands or Memory-Resident Commands 2. External Command or Disk-Residence Commands â⬠¢ Any instruction given to the computer to perform a specific task is called command. The DOS has several commands, each for a particular task and these are stored in DOS directory on the disk. The commands are of two types : (a)Internal Commands : These are in built commands of MS-DOS i.e. these are stored in Command interpreter file (COMMAND.COM). These commands reside in the memory as long as the machine is at the system prompt(C:>) level. To use these commands no extra /external file is required. E.g. DATE, TIME, DIR, VER etc. These are also called Memory Resident Commands. These commands are automatically loaded into the computerââ¬Å¸s memory during the booting process. They actually included in the Command.com file. So these commands are executable immediately after getting the DOS prompt. Example: mkdir, cd, rd, copycon etc. (b) External commands : These are separate program (.com) files that reside in DOS directory and when executed behave like commands. An external command has predefined syntax. for e.g. HELP, DOSKEY, BACKUP, RESTORE, FORMAT etc. These are also called Disk-Resident Commands. These commands are meant for special purpose. These are found in separate files on Hard Disk or Floppy Disk, hence they donââ¬Å¸t typically consume valuable memory space. They are loaded into memory only when called. Example: xcopy, move, doskey etc. Microsoft Disk Operating System Introduction to the Operating Systems: An Operating system is software that creates a relation between the User, Software and Hardware. It is an interface between the all. All the computers need basic software known as an Operating System (OS) to function. The OS acts as an interface between the User, Application Programs, Hardware and the System Peripherals. The OS is the first software to be loaded when a computers starts up. The entire application programs are loaded after the OS. Whenever an application needs information it requests the OS which in turn queries the System clock on the motherboard. User interacts with the computer through the OS then OS interprets inputs given by a user through the Keyboard, Mouse or other input device and takes appropriate actions. An Operating System can be of Three Types: Single User MS-Dos, MS-Win 95-98, Win-ME Multi User UNIX, Linux, XENIX Network Novel Netware, Win-NT, Win-2000-2003 1. Single User: If the single user os is loaded in computerââ¬â¢s memory; the computer would be able to handle one user at a time. 2. Multi user: If the multi-user os is loaded in computerââ¬â¢s memory; the computer would be able to handle more than one user at a time. 3. Network: If the network os is loaded in computerââ¬â¢s memory; the computer would be able to handle more than one computer at time. Command Prompt Interface: Operating System provides a text based interface called command prompt. From the command prompt commands can be issued to perform file and disk management and to run program. Results of these commands are presented to the user as text message. C:>The command prompt can be an alphabet followed by one colon (:), one back slash (), one greater than sign (>) and one blinking element called cursor (_). Where C: represents the Drive letter (Current Drive) represents the current folder / Directory > represents the end of the Prompt and _ blinking element (represents the Cursor) Always a cursor position decides that the current typed letter from the keyboard will appear on that position. The operating system (OS) is the first program that must be loaded into the memory of your PC before you can use it for any application. You can start your computer with disk operating system (DOS) or some other operating system such as Windows 95, 97, 98 or Windows NT that might be installed in the Hard disk. In this chapter, we shall discuss the basic facilities available in DOS. Switch to MS-DOS and go through most of the text given in this and the next two chapters. If your computer is running under windows 95/98 or Windows NT, perform the following steps to switch to MS-DOS, otherwise move to section 2.1. ï⠷ Click the start button in the taskbar and press the windows logo key to open the start menu then click programs in the start menu. ï⠷ Windows displays the program submenu. ï⠷ In the program menu click MS-DOS Prompt and your screen displays a window that contains MS-DOS Prompt, such as ââ¬Å"C:windows>_â⬠. ï⠷ If you like you can also restart your computer in MS-DOS mode by using the following steps: o Close any open programs o Click the Start Button in the TaskBar or Press the Windows Logo Key to open the Start Menu. o Click ââ¬Å"restart in MS-DOS Modeâ⬠and then click OK. Wait for some time and your PC restarts in MS-DOS Mode. After your PC starts in MS-DOS Mode or window, skip the next section and move to section 2.2. What is a File? In computer terminology, file is a collection of text or data stored on a storage device, such as a Floppy Disk or Hard Disk. If you new to computers, it may sound a bit complicated. Well, a computer file is not much different from a conventional paper file that you must have used, or at least seen being used. Just as you stored different types of documents (invoice, letters, reminders, memos etc.) in conventional files, computer files too store information. File Name Each file is given a name so that it can be referred to later. This name is called Filename. The filename in DOS can be up to eight alpha-numeric characters long. Optionally it can also have a period (.) followed by an extension name. The extension name the up to three characters long. For instance, consider the following filename: REPORT2 PROGRESS.DOC Here REPORT2 is a filename. This filename does not have an extension name ââ¬â ââ¬Å¾DOCââ¬Å¸. The use of an extension name in a filename is optional. However, the extension name helps in organizing and identifying a file. For instance ââ¬Å¾DOCââ¬Å¸ may suggest that it is a document file; and ââ¬Å¾COMââ¬Å¸ may suggest that is a command file. If you use an extension name with a filename, normally you will have to specify the complete file name, normally you will have to specify the complete file name (i.e. including the extension name) while using it with DOS commands. While naming files, you can use the following characters in filename: A- Z, a- z, 0 ââ¬â 9, @, #, $, %, ^, &, -, _, { },`, ~,( ) You cannot use other characters, such as coma (,) colon (:), semicolon (;), , , /, etc. in filename. Moreover, you cannot use space in filenames. Some examples of invalid file names are: Filename Reason SALE 2 Contains space PROGRESSER Contains more that eight characters MY, File Contains commas CHAP_01.DOC3 Extension name contains more than 3 characters If you use more than eight characters in the filename or more than three characters in the extension name, DOS may automatically truncate the filename by removing extra characters. Further, some file names, such as COM 1, COM 2, LPT1, com and PRN are reserved by DOS for its own use. Therefore, do not use these names to name your file. Also, remember that all DOS application programs including Word, Excel, WordStar, Bbase III PLUS AND Fox Pro follow the same file naming convention. WHAT IS A Directory? As you know, the storage capacity of the hard disk is usually quite large (10 MB to a few GB). You can store hundreds or even thousands of files in your hard disk. Even the capacity of a floppy disk is large enough to store many files. A directory is nothing but a named section of a storage device, such as hard disk, floppy disk. In other words, to organize file on hard disk or floppy disk, these are divided into various segments (sections), called directories. You can store any number of files in each directory. The directory helps to organise your file in an efficient manner. Using directories in a storage devise is similar to keeping different types of files in an office in separate drawers of a filing cabinet. For instant, Xyz Company may keep all sales files in the first drawer, all purchase files in the second drawer and all employeesââ¬Å¸ files in the third drawer of a filing cabinet. In the same way, when XYZ Company computerizes its operation, it may store all sales files in the SALES directory, all purchase files in the PURCHASE directory and all employeesââ¬Å¸ files in the EMPOLYEES directory. Similarly, the user Raj Kumar may keep his personal files in the RAJ directory and the secretary of XYZ Company may store the letters in the LETTERS or DOC directory. Like a file name, the directory name can also have up to eight alpha-numeric characters. The directory name can also have and extension name up to 3 characters long. However, normally, the extension name is not used with the directory name. When you start your PC, it usually responds with ââ¬Å¾C :/>ââ¬Å¸ and selects the main or the root directory of drive C. Any file that you create or copy to driveà C is added to this root directory. If you continue to add files in the root directory, after a few days, the root directory will have too many files. This will not only confuse you, it will also make the PC slow. The PC may take too long to locate or open the files if there are too many files in a directory. There for you should try to use directories (and sub directories) in your hard disk DOS always creates a root directory in each story device. You can create new directories in the root directory of the hard disk or floppy disk. You can store files in these directories. Moreover, beside files, each directory can also have directories. Those, the file and directory organization in DOS looks like the roots of a tree, as show in figure 2.1.here, the root directory in drive C contains if you files in two directories ââ¬â WORD and EXCEL. The WORD directory contains a few files as well as a directory TENDER. Sometimes, the second level directory (TENDER in this case) is called sub-directory. The root directory contains another directory ââ¬â EXCEL. This directory contains a few files as well as two directories ââ¬â SALES and EMPLOYEE. Both these directories contain files. At any level in the directory structure, can be created. For example, another directory, say FOXPRO directory may contain files as well as more directories. If you want, you can remove files from any directory or more files to another directory. You can also delete an enter directory. Comments to copy, move, rename and delete files and to create and change directories are discussed letter in this chapter. Additional file and directory comments are discussed in the next chapter.
Friday, November 8, 2019
USA Patriot Act essays
USA Patriot Act essays To borrow a term from Shakespeare, the arguments against the U.S. Patriot Act (USAPA) are much to do about nothing. Upon exploration of major concerns regarding USAPA, the arguments made are weak and often over exaggerated claims designed to inflame those concerned with protecting civil liberties. This paper discusses the opponents' major points against USAPA and finds each assertion to be inane or false. The reality is that USAPA simply allows the investigation of all suspected terrorist activity using surveillance common to other criminal investigations and improved communication across government agencies. Opponents of the USAPA argue that the expanded definition of terrorism to cover domestic as well as international terrorism expands the type of conduct that the government can investigate too broadly (How the USA Patriot Act redefines "domestic terrorism). They believe that the government will unfairly use this broader interpretation to monitor the activities of activist organizations such as Greenpeace and Operation Rescue. And, opponents are also concerned that the government can spy or suspected computer trespassers without a court order and can add samples to DNA databases for those convicted of any crime of violence (EFF analysis of the provisions of the USA Patriot Act). The notion that the government should be restricted from investigating domestic terrorism is absurd. Americans were responsible for approximately seventy-five percent of the 335 incidents between 1980 and 2000 that the FBI has classified as suspected or confirmed terrorism (American militant extremists). USAPA defines domestic terrorism as criminal acts that are "dangerous to human life", a category that clearly warrants government investigation. And, accusations that USAPA allows the federal government to secure secret search warrants with no probable cause are not true (Herron, M. an...
Wednesday, November 6, 2019
The eNotes Blog Before I Die Communities, Art, Purpose,Reflection
Before I Die Communities, Art, Purpose,Reflection A few years ago, artist Candy Chang lost a good friend. The experience left her thinking a lot about death, what in her life was of value, what she wanted to do while she had time, and with whom she should spend those hours. à While she knew she wanted to define these objectives, Chang says that she struggled to maintain perspective. à She wondered if others felt similarly adrift. Chang noticed that there was an old, abandoned home in her New Orleans neighborhood, a perfect canvas for expression. She, along with a group of friends, painted one side of the home in chalkboard paint and created a Before I die ___________________ stencil: Chang had no idea what to expect. But she and her friends attached little baskets of chalk to the sides and stepped away to wait and see: To Changs great delight and surprise, the very next day, à the wall was bursting with handwritten responses and it kept growing:à Before I die I want toâ⬠¦ sing for millions, hold her one more time, eat a salad with an alien, see my daughter graduate,à abandon all insecurities, plant a tree,à straddle the International Date Line,à be completely myselfâ⬠¦. The project did what Chang had hoped it would do and more. It made her feel connected. It focused her thoughts and attention. Moreover, she came to know her neighbors in unexpected ways which were sometimes comic, sometimes tragic. The project soon had many enthusiastic supporters and requests poured in for more of the Before I Die _______ walls. Chang and her colleagues responded by creating aà toolkità and theà project site beforeidie.ccà to help people make a wall with their community. You can also download all files for free to remix or create your own stencils. To date, one hundred à Before I Die ___________ walls have been created in over ten languages and in thirty countries. à The Atlanticà calls Before I Die _____________à ââ¬Å"One of the most creative community projects ever.â⬠à Chang, who has given a popular TED Talk on the project, says: à Each wall is a tribute to living an examined life. Our public spaces are as profound as we allow them to be.à The historian Lewis Mumford once wrote that the origins of society were not just for physical survival but for sacred things that offer ââ¬Å"a more valuable and meaningful kind of life.â⬠At their greatest, our public spaces can nourish our well-being and help us see that weââ¬â¢re not alone as we try to make sense of our lives.à Regularly contemplating death, as Stoics and other philosophers encourage, is a powerful tool to restore perspective and remind us of the things that make our lives meaningful.à Each passerby is another person full of longing, anxiety, fear, and wonder. With more ways to share in public space, the people around us can not only help us make better places, they can help us become our best selves. Here are a few more images from the original New Orleans site. You can visit other walls here. à Follow projects on Facebook or Twitter. What do you want to write?
Monday, November 4, 2019
Hinduism Essay Example | Topics and Well Written Essays - 500 words
Hinduism - Essay Example Therefore, those that do bad deeds, such as rob or steel, are polluting their karma, which will lead to unfortunate events and vice versa for good deeds. It is also important in the concept of reincarnation, as how good your karma is will determine what an individual is reincarnated as. This is especially important because a person must have very good karma in order to escape the cycle of reincarnation in order to achieve a higher state of enlightenment known as moksha. An avatar is a manifestation of a Hindu deity on Earth. Each sect of Hinduism has a different view regarding these types of manifestations. The manifestation does not have to occur solely as a human, but can be in the form of an animal or any other sort of creature. They appear as a source of divine influence and often speak to people offering sageââ¬â¢s advice. In addition, each avatar has unique qualities, which separate them from one another. Each sect of Hinduism acknowledges the existence of a different number of avatars. In the basics of Hinduism for someone who is unfamiliar to the religion, it would sound unique in comparison to its Christian counterpart.
Saturday, November 2, 2019
Leadership and managment Assignment Example | Topics and Well Written Essays - 1500 words
Leadership and managment - Assignment Example Longmore (2005) states that ââ¬ËConflict is an inevitable aspect of lifeââ¬â¢. Coming to the organization, the name of the organization is Greenland and it deals with developing and maintaining the structures of houses and other buildings. The working structure of the organization is that there are sub contractors who take orders from the management to get them completed in the time given by the management of that specific organization. There are three departments of the organization. First department is the information department which gathers information regarding presence of any contract opportunity in any specific area. The head of this department is information manager whose role is to supervise all work related to his department and submit the weekly report to the management department. The second department is the management department whose role is to analyze the weekly report given to them by the information department and assign different contracts to different sub co ntractors depending upon their experience and capabilities. The head of this department is executive manager who is responsible for all the acts not only related to the management department but also related to the whole organization as he is the head of the organization too. The third and the last department is of the selected sub contractors who take contracts from the management department and get them completed in the given time frame by the management. The head of this specific department is the chief contractor whose role is to manage all other sub contractors and submit their weekly efficiency report to the management department. Now, letââ¬â¢s come to the conflict which has occurred among some of the employees of the management and the sub contractorsââ¬â¢ department. Bhushan (n.d.) said that ââ¬ËConflicts are inevitable in ones organizational life and personal lifeââ¬â¢. Here, the conflict is that one of the sub contractors has
Subscribe to:
Posts (Atom)